裝修的各個流程，工序越多，說明越復雜，時間花費越長，精力也需要花費更多，所以總有些憊懶的裝修工人們這里省一步那里省一步，但后裝修出來的效果完全令人不滿。其一，許多工人在批刮膩子前就會缺少界面劑涂刷這一步驟，認為這一步完全可以省去，但真的是這樣嗎？今天詳細給大家講解一下界面處理劑的重要作用和誤區解答，一起來看看吧！

The more processes and procedures involved in decoration, the more complex it becomes, the longer the time and energy required. Therefore, there are always some lazy decoration workers who save a step here and there, but the results of the later decoration are completely unsatisfactory. Firstly, many workers may lack the step of applying interface agent before applying putty in batches, believing that this step can be completely omitted, but is it really the case? Today, we will explain in detail the important role and misconceptions of interface treatment agents. Let's take a look together!

為什么要使用濟南界面處理劑？

Why use Jinan interface treatment agent?

使用界面劑可以使基層表面更加粗糙，增強其對基層的粘結力，避免抹灰層空鼓起殼，避免后期需要重做找平層和粉刷層的風險。所以說，界面劑主要就是可以在以下兩種情況下起到關鍵作用：

The use of interface agents can make the surface of the base layer rougher, enhance its adhesion to the base layer, avoid hollowing and peeling of the plastering layer, and avoid the risk of needing to redo the leveling layer and painting layer in the later stage. So, the interface agent can mainly play a key role in the following two situations:

1.當墻面基層過度光滑

1. When the base layer of the wall is excessively smooth

墻體基層過于光滑時，會減弱墻體和膩子之間的粘結力，而界面劑的作用則主要是為了杜絕這些情況而導致的不良后果。光滑的墻面刷涂界面劑由于其優異的滲透性，能充分滲透基層表面，從而增加了墻體對膩子的附著力。

When the base layer of the wall is too smooth, it will weaken the bonding force between the wall and the putty, and the function of the interface agent is mainly to prevent the adverse consequences caused by these situations. Smooth wall brushing with interface agent can fully penetrate the surface of the base layer due to its excellent permeability, thereby increasing the adhesion of the wall to the putty.

2.當墻面過于疏松

2. When the wall is too loose

對于疏松墻面，刷涂界面劑可以對疏松的部位進行滲透加固，從而避免了刮涂膩子后產生空鼓脫落情況。

For loose walls, brushing interface agents can penetrate and reinforce the loose areas, thereby avoiding the occurrence of hollowing and peeling after applying putty.

當然，要完全發揮界面劑的效果，一些誤區大家也必須避坑！

Of course, in order to fully utilize the effectiveness of interface agents, some misunderstandings must also be avoided!

使用界面劑的誤區

Mistakes in using interface agents

1.界面處理劑涂刷越厚越好

1. The thicker the interface treatment agent is applied, the better

1.作為墻面基層處理材料，界面劑可以說是起到了承上啟下的作用，能夠鞏固基底且讓墻體基層與找平層緊密粘貼在一起。

As a wall base treatment material, the interface agent can be said to play a connecting role, consolidating the base and making the wall base and leveling layer tightly stick together.

2.界面劑的高滲透性可以使墻面基層與找平層緊密貼合，具有高滲透力的界面劑能深入滲透到墻面基層，待其固化后，將墻面基層牢牢封固住，使墻面基底變得更加堅實，防止后期墻面因浮灰、松散物等影響后面找平層材料與基層的粘結力；還可以防止后期找平層空鼓脫落。

2. The high permeability of the interface agent can make the base layer of the wall closely adhere to the leveling layer. The interface agent with high permeability can penetrate deeply into the base layer of the wall. After it solidifies, the base layer of the wall is firmly sealed, making the wall base more solid, and preventing the bonding force between the leveling layer material and the base layer of the later wall from being affected by floating ash, loose materials, etc; It can also prevent hollowing and falling off of the leveling layer in the later stage.

3.實際上，決定界面劑好壞的不是其涂刷遍數，而是它的滲透性能，所以小編建議大家，界面劑施工只要涂刷1-2遍即可，不過要記住滿涂墻面，不要漏涂。

3. In fact, the quality of the interface agent is not determined by the number of times it is applied, but by its permeability. Therefore, the editor suggests that the interface agent construction only needs to be applied 1-2 times, but it is important to remember to fully apply the wall surface and not miss the application.

裝修施工進場就刷界面處理劑？

Apply interface treatment agent upon arrival of decoration construction?

很多裝飾公司或裝修工人在進場后就開始涂刷界面處理劑，隨后進行水電改造施工，然而這種施工順序是錯的。要知道，但凡裝修現場施工涉及到水電改造工程，不論裝飾公司如何力保文明施工，仍然沒辦法避免室內揚塵。

Many decoration companies or workers start applying interface treatment agents after entering the site, and then carry out water and electricity renovation construction. However, this construction sequence is incorrect. It should be noted that wherever the construction of decoration sites involves water and electricity renovation projects, no matter how much the decoration company strives to ensure civilized construction, there is still no way to avoid indoor dust.

而室內揚塵大部分會降落于在地面被工人清掃處理，一部分會通過開窗措施逸散于室外，一部分被阻隔在工人的口罩處，而還有一部分則會沉積于涂刷了界面劑的墻面。所以如果進行墻面找平時不對這些揚塵做清理的話，后期很有可能會出現開裂空鼓或脫落。所以涂刷界面劑的正確施工工序應放在水電改造做完之后，墻面找平工序之前。

Most of the indoor dust will fall on the ground and be cleaned by workers, some will escape to the outside through window opening measures, some will be obstructed by workers' masks, and some will deposit on the walls coated with interface agents. So if you don't clean up these dust during wall leveling, there is a high possibility of cracking, hollowing, or detachment in the later stage. So the correct construction process for applying interface agent should be placed after the completion of water and electricity renovation and before the wall leveling process.

以上就是界面劑的作用及使用界面劑的誤區內容講解了，希望能夠給您好的幫助，更多事項就來我們網站http://m.sjzmx.cn咨詢！

The above is an explanation of the functions of interface agents and the misunderstandings in using them. We hope it can be helpful for you. For more information, please come to our website http://m.sjzmx.cn consulting service