膩?zhàn)臃凼墙ㄖb飾材料的一種，主要成分是滑石粉和膠水。 剛剛購置的毛坯房表面的一層白色是膩?zhàn)樱ǔＤ佔拥陌锥仍?0以上細度在330以上。
Putty powder is a kind of building decoration materials, the main components are talcum powder and glue. A layer of white putty on the surface of the blank room just purchased is putty. Generally, the whiteness of putty is above 90 and the fineness is above 330.
許多膩?zhàn)臃凼褂谜卟坏貌怀姓J(rèn)，膩?zhàn)幽z粉脫粉是一個很嚴重的問題，它會引起乳膠漆的脫落，以及膩?zhàn)訉拥钠鸸模芽p，進而引起乳膠漆飾面發生裂縫。
Many users of putty powder have to admit that it is a very serious problem to remove the powder from the putty powder, which will cause the latex paint to fall off, and the putty layer to bulge and crack, and then cause the emulsion paint surface to crack.
膩?zhàn)臃勖摲鄣舴邸⒌舭资悄壳俺Ｒ姷哪佔邮┕ず髥栴}，要了解膩?zhàn)臃勖摲鄣脑颍紫纫私饽佔臃鄣幕驹牧辖M分與固化原理，然后結合膩?zhàn)邮┕r(shí)的墻面干燥程度、吸水率，溫度、天氣干燥程度等。今天膩?zhàn)臃蹚S家小編談一談膩?zhàn)臃鄣舴鄣闹饕颍黄饋砜纯窗?
It is a common problem after the putty construction that the putty powder degrades and whitens. To understand the reasons of the putty powder removing powder, we should first understand the basic raw material composition and curing principle of the putty powder, and then combine the dryness degree of the wall surface, water absorption rate, temperature and weather dryness degree during the putty construction. Today's putty powder manufacturers to talk about the putty powder powder off the main reason, let's have a look!
![濟南膩?zhàn)臃? src=]()
原因一
Reason one
膩?zhàn)拥恼辰Y(jié)強度不夠造成脫粉，生產廠家一味的降低成本，膠粉的粘結強度差，添加量較小，特別是內墻膩?zhàn)樱辰Y(jié)強度的大小，脫粉不脫粉和膠粉以及膠水的質量和添加量有很大關系。
The adhesive strength of putty is not enough, which leads to powder shedding. The manufacturers blindly reduce the cost. The adhesive strength of rubber powder is poor, and the addition amount is small, especially for the putty of interior wall. The size of bonding strength and the quality and amount of glue powder and glue have a great relationship.
原因二
Reason two
設計配方不合理，選材的問題和結構的問題，在膩?zhàn)优浞街泻苤匾１热缌u丙基甲基纖維素(HPMC)做內墻不防水的膩?zhàn)樱琀PMC雖然很貴，但對雙飛粉，滑石粉，硅灰石粉等填充料不起作用，如果僅使用HPMC就會引起脫粉，而價格低的CMC、CMS反到不脫粉，但是CMC、CMS不能做防水膩?zhàn)樱膊荒茏鐾鈮δ佔樱驗镃MC和CMS遇到灰鈣粉、白水泥起反應，這都會引起脫粉，也有把聚丙烯酰胺加入灰鈣粉、白水泥做為防水涂料，也會起化學反應引起脫粉。
Unreasonable design formula, material selection and structure are very important in putty formula. For example, hydroxypropyl methylcellulose (HPMC) is not waterproof putty for interior walls. Although HPMC is very expensive, it does not work on fillers such as Shuangfei powder, talcum powder and wollastonite powder. If only HPMC is used, it will cause de dusting. However, CMC and CMS can not be used as waterproof putty or exterior wall putty, because CMC and CMS encounter lime calcium powder and white cement Reaction, which will lead to de powdering, but also add polyacrylamide to lime calcium powder, white cement as waterproof coating, will also cause chemical reaction.
原因三
Reason 3
混合攪拌不均勻，是造成內外墻膩?zhàn)用摲鄣闹饕颍珖械纳a(chǎn)廠家生產膩?zhàn)臃墼O(shè)備簡單，五花八門，不是專用攪拌設備，攪拌不均勻，引起膩?zhàn)用摲邸?/div>
The uneven mixing and mixing is the main reason for the putty powder removing from the internal and external walls. Some manufacturers in China have simple and varied equipment for producing putty powder, which is not a special mixing equipment, and the mixing is uneven, which causes the putty to be powdered.
膩?zhàn)臃蹚S家
Putty powder manufacturer
原因四
Reason four
生產工藝的錯誤造成膩?zhàn)用摲郏绻旌蠑嚢铏C(jī)沒有清掃的功能，殘留較多，普通膩?zhàn)又械腃MC就會和防水膩?zhàn)又械幕意}粉起反應，內墻膩?zhàn)又械腃MC、CMS和外墻膩?zhàn)拥陌姿嗥鸱磻?yīng)而造成脫粉。有的公司專用設備設置了清掃口，可以把機器中的殘留物清掃干凈，不僅保證膩?zhàn)拥馁|(zhì)量，還可以一機多用，買一臺設備生產多種膩?zhàn)印?/div>
If the mixing mixer does not have the function of cleaning and there is a lot of residue, the CMC in the ordinary putty will react with the lime calcium powder in the waterproof putty, and the CMC and CMS in the inner wall putty will react with the white cement of the exterior wall putty to cause the powder removal. Some company's special equipment is equipped with cleaning mouth, which can clean up the residue in the machine, not only to ensure the quality of putty, but also to use one machine for multiple purposes. Buy one equipment to produce a variety of putty.
原因五
Reason 5
填充料的質量的不同也容易造成脫粉，內外墻膩?zhàn)哟罅康氖褂锰畛淞希鞯刂剽}粉、滑石粉里面Ca2CO3的含量不同，酸堿度不同也會造成膩?zhàn)拥拿摲郏热缰貞c和成都的內墻膩?zhàn)臃塾猛瑯拥哪z粉，但滑石粉、重鈣粉不同，在重慶不脫粉，在成都就脫粉，在河南、東北不脫粉，而在一些地區就脫粉。
The quality of the filler is also easy to cause the powder removal. A large number of fillers are used for the putty of internal and external walls. However, the content of ca2co3 in the putty powder of the heavy calcium powder and talc powder in different places and the pH value are different. For example, the same rubber powder is used for the interior wall putty powder of Chongqing and Chengdu, but the talcum powder and the heavy calcium powder are different. They are not powdered in Chongqing, but they are removed in Chengdu, and in Henan and East China In the north, it is not powdered, but in some areas.
原因六
Reason six
夏季外墻膩?zhàn)拥谋Ｋ粔颍貏e是在大樓高層門口、窗口等高溫通風的地方，灰鈣粉和水泥的初凝時間不夠就已失去水份，又沒有養護好，也會嚴重脫粉。
In summer, the water retention of putty for exterior wall is not enough, especially in the high-rise building doors, windows and other places with high temperature and ventilation. If the initial setting time of lime calcium powder and cement is not enough, the moisture will be lost, and the powder will be seriously desorbed if it is not maintained well.
主站蜘蛛池模板：
日日麻批免费40分钟无码|
亚洲桃色天堂网|
a级毛片在线免费|
久久久欧美精品激情|
午夜成人性爽爽免费视频|
男女动态无遮挡动态图|
国产91精品调教在线播放|
人人妻人人澡人人爽欧美精品|
亚洲AV无码国产精品色午|
国产最新一区二区三区天堂|
天堂女人av一区二区|
经典三级久久|
国产在线国偷精品免费看|
最新中文字幕AV无码专区不|
亚洲欧美日韩中文字幕一区二区
|
亚洲自偷自偷在线成人网站传媒|
久久国产欧美日韩精品免费|
久久动漫精品|
久久久久亚洲精品无码网址色欲
|
亚洲国产精品一区二区久久hs|
女人张开腿无遮无挡视频免费|
国产欧美视频综合二区|
久久青青草原亚洲AV无码APP|
成人国产亚洲精品一区二|
国产SUV精品一区二区88L|
亚洲av国产大片在线观看|
美女裸体十八禁免费网站|
一区二区传媒有限公司|
国产精品久久久久影院老司|
天天摸夜夜添久久精品麻豆|
美女av网站|
亚洲国产色婷婷久久99精品91
|
人妻丰满熟妇无码|
国产精品R级最新在线观看|
中文字幕久热精品视频在线|
亚洲a∨无码一区二区|
亚洲高清WWW色好看美女|
娇妻玩4p被三个男人伺候|
亚洲精品第一国产综合境外资源|
性做久久久久久久久|
秘密教学57薇娅求子豪免费|
魯公網安備